alpha:ONE
Board overview
alpha:ONE combines high quality industrial hardware with the ease and speed of programming of MicroPython. This allows engineers to implement prototypes and products in a fraction of the time required for traditional C/C++ based development.
Key features:
Runs MicroPython out of the box
Provides the most relevant industrial communication interfaces, such as Ethernet, Can Bus, RS232, RS422 and RS485
Twelve 12/24V high-speed isolated digital inputs
Six 12/24V high power outputs with up to 32A capability
A microSD card slot to store large amounts of data, such as for extensive datalogging
A battery-backed real time clock keeps track of the datetime also after power cycles
Wide supply input voltage range of 6V to 36V
The board can also be supplied directly through the Micro-USB connector for ease of use while developing
Firmware updates are possible
alpha:ONE is suitable for a variety of industrial and research applications, such as:
Programmable Logic Controller
Rapid prototyping
Control systems for test setups
Signal/subsystem simulators
Data logging
Industrial IoT applications
Specifications
Technical specifications:
STM32F722IET7 32Bit microcontroller
216MHz Cortex M7 CPU
512KB internal flash ROM
256KB internal RAM
8MB external QSPI flash
Additional 8MB external flash
6-36V power supply input (contact systematica for higher voltages)
3x RGB LEDs
12x 11-36V high-speed isolated digital inputs
6x 9-48V 32A power outputs (high side switches)
21x 3.3V multifunction pins (IO/PWM/ADC/DAC/UART/SPI/I2C)
microSD card slot (up to 32 Gb)
Real time clock with high-precision oscillator and battery backup
JTAG connector
Micro USB inteface (and 5V supply input)
1x 10/100 Mbit Ethernet
1x CAN Bus
1x switchable RS232 or RS485 half-duplex
2x RS422/485 full-duplex
Mechanical specifications:
Size: Euro card 160x100x23mm
Weight: 150g
Pinout
Downloads
alphaone_flyer.pdfalphaone_pinout.pdfalphaONE_minimalDetail.stp