omega:ONE

omega:ONE is an affordable industrial multipurpose 32bit microcontroller board, which supports MicroPython programming.
The comprehensive suite of STM32 development tools is also supported for traditional C/C++ programming.

Board overview

_images/omegaone_overview.png
omega:ONE combines industrial hardware with the ease and speed of programming of MicroPython.
This allows engineers to implement prototypes and products in a fraction of the time required for traditional C/C++ based development.
The board has a very wide-range supply input of 6.5V to 70V.
Twenty 12/24V opto-isolated digital inputs.
Four 12/24V H-bridges with up to 2.5A peak output capability, which can be also used as eight independent outputs.
Common industrial communication interfaces, such as Ethernet, Can Bus and RS422/RS485 (half-/full-duplex), are also provided.
A microSD card slot adds the possibility to store large amounts of data, such as for long-term logging.
A battery-backed real time clock keeps track of the datetime also after power cycles.
The board can also be supplied directly through the USB-C connector for ease of use while developing.
Firmware updates are possible.

omega:ONE is suitable for a variety of industrial and research applications, such as:

  • Programmable Logic Controller

  • Rapid prototyping

  • Control systems for test setups

  • Data logging

  • Signal/subsystem simulators

Specifications

Technical specifications:

  • STM32H743VIT6 32Bit microcontroller

  • Cortex M7 CPU running at 400 MHz

  • 2048 KB internal flash ROM

  • 1024 KB internal RAM

  • 8 MB external QSPI flash

  • 6.5-70V power supply input

  • 20x 9-36V opto-isolated digital inputs

  • 4x 9-45V 2.5A peak / 1.75A rms H-bridges, also usable as 8x independent power outputs

  • 46x 3.3V multifunction pins (GPIO/PWM/ADC/DAC/UART/SPI/I2C), partly shared with other resources

  • microSD card slot (up to 32 Gb)

  • Real time clock with battery backup

  • USB-C inteface (and 5V supply input)

  • 10/100 Mbit Ethernet

  • CAN Bus

  • RS422/485 half- or full-duplex

Mechanical specifications:

  • Size: Euro card 160x100x23mm

  • Weight: TBD g

Pinout

images/omegaone_pinout.png

Downloads

Product Flyer: omegaone_flyer.pdf
Board Pinout: omegaone_pinout.pdf
Minimal 3D CAD model: omegaone_minimalDetail.stp
Micropython Firmware: firmware download